General Motors torque specifications

GENERAL MOTORS
APPLICATION	FT-LBS / ( N-m)
AXLE SHAFT FLANGE BOLT
'S' BODY CAR	27 (37)
TRUCKS	60 (82)
AXLE SPINDLE NUT
'A' BODY	192 (261)
'C' 'E' 'H' & 'K' BODIES	180 (245)
'J' & 'L' BODIES	191 (260)
'P' BODY	200 (271)
'S' BODY CAR	137 (186)
'T' SERIES TRUCK	180 (245)
'V' BODY	183 (249)
ALL OTHER BODIES	185 (251)
BRAKE CALIPER BOLTS
'A' & 'C' BODY	38 (51)
'E' 'K' & 'V' BODIES	63 (85)
'P' BODY	62 (84)
'S' BODY CAR	65 (88)
ALL OTHER BODIES	28 (38)
BRAKE HOSE SUPPORT BOLT	14-20 (19-27)
HUB & BEARING ASSEMBLY BOLTS
'A' BODY	63 (85)
'A' BODY W/HD BRAKES	70 (95)
'P' BODY	62 (84)
'J' 'N' & 'L' BODIES	40 (54)
ALL OTHER BODIES	70 (95)
INTERMEDIATE SHAFT BRACKET-TO-ENGINE BOLT	41 (56)
LOWER BALL JOINT-TO-CONTROL ARM NUT
'P' BODY	13 (18)
'S' BODY CAR	47 (64)
ALL OTHER BODIES	50 (68)
LOWER BALL JOINT-TO-STEERING KNUCKLE NUT
'A' BODY	33 (45)
'C' 'E' & 'H' BODIES	special instructions #1
'J' & 'N' BODIES	45 (61)
'L' BODIES	45-55 (61-75)
'P' BODY	50 (68)
'S' BODY CAR	82 (111)
ALL OTHER BODIES	special instructions #2
SHOCK ABSORBER LOWER MOUNTING BOLT
'M' & 'T' SERIES BRAVADA	65 (88)
'T' SERIES TRUCK (1993-94)	54 (73)
TIE ROD END NUT
'C' & 'H' BODIES	35-52 (47-71)
'E' 'K' & 'V' BODIES	special instructions #3
'T' SERIES TRUCK	26-35 (35-47)
ALL OTHER BODIES	35 (47)
UPPER BALL JOINT NUT-TO-KNUCKLE	83 (113)
WHEEL LUG NUTS
'S' BODY CAR	76 (103)
'T' SERIES TRUCK
ALUMINUM WHEELS	90-100 (122-136)
STEEL WHEELS	70-80 (95-109)
ALL OTHER BODIES	100 (136)

1. Tighten to 8 ft-lbs (10 N-m), then tighten an additional 1/3 turn to at least 37 ft-lbs (50 N-M). Upon initial installation of replacement ball joint, tighten nut to to 81 ft-lbs (110 N-m).

2. Tighten to 8 ft-lbs (10 N-m), then tighten an additional 1/3 turn to at least 48 ft-lbs (65 N-m).

3. Tighten to 8 ft-lbs (10 N-m), then tighten an additional 1/3 turn to at least 33 ft-lbs (45 N-m).